Some winXP: No interface configure menu action

[t.schlumpf]

Hi EmBitz

Thank you for the quick response. That's what I call Support!

I see exactly the same behaviour when using Debug->Interfaces

I played around with EbLink -i. EmBitz is running, a CLI window is open. These are the results:

Working machine:

• STlink connected. EbLink -i prints 'StLink' and terminates, ok. When starting EbLink -i multiple times in sequence, it will hang after some calls, very irregular.
  
• After disconnecting StLink, EbLink -i prints 'StLink' and hangs, must be closed using task manager. 
  
• Clicking Flash->Configure Flashtool  and Debug->Interfaces also work with disconnected StLink.
  

Failing machine:

• After a reboot, EbLink -i terminates exactly once as it should, regardless of the connected STlink device. Every subsequent call hangs.
  
• Using both Flash->Configure Flashtool and Debug->Interfaces always hang, even after a reboot
  

Hope this helps a bit
Tony