Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Add STM32U5 and STM32L5 support
#1
Hello,

basicly I'm using a selfmade cmake based buildchain and using EMBitz only for debuging by passing the .elf file to it.
I have bought 2 nucleo boards. Both are not suppoerted, yet. I would like to add the both devices myself, just by copy&paste&replace. But I'm not sure about the different core M33.
I also tried to check EBLink-github for updates, but I cannot reach it.


ST-LINK SN  : 002B004F3331510A33323639
ST-LINK FW  : V3J8M3
Board      : NUCLEO-U575ZI-Q
Voltage    : 3.30V
SWD freq    : 24000 KHz
Connect mode: Normal
Reset mode  : Software reset
Device ID  : 0x482
Revision ID : Rev X
Device name : STM32U575/STM32U585
Flash size  : 2 MBytes
Device type : MCU
Device CPU  : Cortex-M33
BL Version  : 0x92
Debug in Low Power mode enabled

Interface USB# : 002B004F3331510A33323639
Interface type : STlink/V3
STlink connect : Under reset
Target voltage : 3.30V
Interface speed: 24000KHz
Target detected: Cortex-M33 (r0p4) with FPv5_SP
HW breakpoints : 8
HW watchpoints : 4
Fault unwind  : Active break (level 2)

Error unsupported STM32 ID: 0x482

Please report this ID so that we can add it.

-------------------------------------------------------

ST-LINK SN  : 066CFF505352716587121640
ST-LINK FW  : V2J37M26
Board      : NUCLEO-L552ZE-Q
Voltage    : 3.24V
SWD freq    : 4000 KHz
Connect mode: Normal
Reset mode  : Software reset
Device ID  : 0x472
Revision ID : Rev B
Device name : STM32L5xx
Flash size  : 512 KBytes
Device type : MCU
Device CPU  : Cortex-M33
BL Version  : --


Interface USB# : 066CFF505352716587121640
Interface type : STlink/V2.1
STlink connect : Under reset
Target voltage : 3.24V
Interface speed: 4000KHz
Target detected: Cortex-M33 (r0p2) with FPv5_SP
HW breakpoints : 8
HW watchpoints : 4
Fault unwind  : Active break (level 2)


Please report this ID so that we can add it.
Reply


Messages In This Thread
Add STM32U5 and STM32L5 support - by Buzzwang - 22-07-2022, 07:49 PM
RE: STM32U5 and STM32L5 - by embitz - 23-07-2022, 06:25 PM
RE: STM32U5 and STM32L5 - by Buzzwang - 24-07-2022, 09:01 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)