Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
C++ Compile Problem ( Flatbuffers) and Tensor flow Micro
#1
Hi! I have been trying to compile Tensor flow Lite Micro Arduino Port (https://github.com/tensorflow/tflite-mic...o-examples)  on STM32 with EmBitz 2.5.

Adding the folders/files  to an empty C++ project for an STM32F4 target as neeed. (TensorFlow and ThirdyParty folders and TensorFlowLite.h) .

The problem comes with the Flatbuffers lib (At  ThirdyParty  folder) that it's a bunch of .h file with C++ content.

It seems that the ide cannot assing C++ libs for this specifc library. This Tensor flow port is intended to run on CM4 targets on arduino so it should works with Embits???

Can some one help? The hw/firmware part of the for the project it's almost done I only need to build this library with Embitz and I don't want to chance for STMcube  Confused

Any one can help please?

Errors attached below:

Code:
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|27|error: 'uoffset_t' does not name a type; did you mean 'offsetof'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|29|error: expected ')' before '_o'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|28|error: class 'flatbuffers::Offset<T>' does not have any field named 'o'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|30|error: 'o' was not declared in this scope|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|31|error: 'o' was not declared in this scope|
src\base.h|31|error: 'FLATBUFFERS_LITTLEENDIAN' was not declared in this scope|
src\base.h|31|note: the macro 'FLATBUFFERS_LITTLEENDIAN' had not yet been defined|
src\base.h|138|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|42|error: 'FLATBUFFERS_CONSTEXPR' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|42|note: the macro 'FLATBUFFERS_CONSTEXPR' had not yet been defined|
src\base.h|178|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|58|error: 'uoffset_t' has not been declared|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|59|error: 'uoffset_t' has not been declared|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|60|error: 'min' is not a member of 'std'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|60|error: 'memcmp' was not declared in this scope|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|22|note: 'memcmp' is defined in header '<cstring>'; did you forget to '#include <cstring>'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|76|error: 'uoffset_t' has not been declared|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|83|error: 'uoffset_t' was not declared in this scope; did you mean 'offsetof'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|84|error: 'uoffset_t' has not been declared|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|85|error: 'uoffset_t' was not declared in this scope; did you mean 'offsetof'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|86|error: 'ReadScalar' was not declared in this scope|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|93|error: 'uoffset_t' has not been declared|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|108|error: 'uoffset_t' was not declared in this scope; did you mean 'offsetof'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|115|error: 'kFileIdentifierLength' is not a member of 'flatbuffers'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|114|error: 'strncmp' was not declared in this scope|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|114|note: 'strncmp' is defined in header '<cstring>'; did you forget to '#include <cstring>'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|124|error: 'uoffset_t' does not name a type; did you mean 'offsetof'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|124|error: expected '>' before '*' token|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|124|error: expected '(' before '*' token|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|124|error: expected primary-expression before '>' token|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|124|error: there are no arguments to 'EndianScalar' that depend on a template parameter, so a declaration of 'EndianScalar' must be available [-fpermissive]|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|124|note: (if you use '-fpermissive', G++ will accept your code, but allowing the use of an undeclared name is deprecated)|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|124|error: expected ')' before ';' token|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|129|error: 'uoffset_t' was not declared in this scope; did you mean 'offsetof'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\buffer.h|137|error: 'uoffset_t' was not declared in this scope; did you mean 'offsetof'?|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|148|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|148|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|169|  required from here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|167|error: no matching function for call to 'flatbuffers::nullopt_t::nullopt_t(int)'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|147|note: candidate: 'constexpr flatbuffers::nullopt_t::nullopt_t()'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|147|note:   candidate expects 0 arguments, 1 provided|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|147|note: candidate: 'constexpr flatbuffers::nullopt_t::nullopt_t(const flatbuffers::nullopt_t&)'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|147|note:   no known conversion for argument 1 from 'int' to 'const flatbuffers::nullopt_t&'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|147|note: candidate: 'constexpr flatbuffers::nullopt_t::nullopt_t(flatbuffers::nullopt_t&&)'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|147|note:   no known conversion for argument 1 from 'int' to 'flatbuffers::nullopt_t&&'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|178|error: expected primary-expression before 'static_assert'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|178|error: expected '}' before 'static_assert'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|174|note: to match this '{'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|174|error: expected ';' before 'static_assert'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|180|error: expected unqualified-id before 'public'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|183|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|183|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|186|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|186|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|189|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|189|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|192|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|192|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|195|error: 'FLATBUFFERS_CONSTEXPR_CPP14' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|195|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP14' had not yet been defined|
src\base.h|188|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|201|error: 'FLATBUFFERS_CONSTEXPR_CPP14' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|201|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP14' had not yet been defined|
src\base.h|188|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|207|error: 'FLATBUFFERS_CONSTEXPR_CPP14' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|207|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP14' had not yet been defined|
src\base.h|188|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|213|error: expected initializer before 'FLATBUFFERS_NOEXCEPT'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|217|error: expected initializer before 'FLATBUFFERS_NOEXCEPT'|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|222|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|222|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|226|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|226|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|230|error: 'FLATBUFFERS_CONSTEXPR_CPP11' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|230|note: the macro 'FLATBUFFERS_CONSTEXPR_CPP11' had not yet been defined|
src\base.h|179|note: it was later defined here|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|234|error: 'T' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|239|error: 'T' does not name a type|
.\cmsis\..\third_party\flatbuffers\include\flatbuffers\stl_emulation.h|243|error: expected unqualified-id before 'private'|
||More errors follow but not being shown.|
||Edit the max errors limit in compiler options...|
||=== Finished: 50 errors, 0 warnings (0 minutes, 6 seconds) ===|


flatbuffers (buffer.h) part:

Code:
#include <base.h>
#include <cstdint>
namespace flatbuffers {

// Wrapper for uoffset_t to allow safe template specialization.
// Value is allowed to be 0 to indicate a null object (see e.g. AddOffset).
template<typename T> struct Offset {
  uoffset_t o;
  Offset() : o(0) {}
  Offset(uoffset_t _o) : o(_o) {}
  Offset<void> Union() const { return Offset<void>(o); }
  bool IsNull() const { return !o; }
};

inline void EndianCheck() {
  int endiantest = 1;
  // If this fails, see FLATBUFFERS_LITTLEENDIAN above.
  FLATBUFFERS_ASSERT(*reinterpret_cast<char *>(&endiantest) ==
                     FLATBUFFERS_LITTLEENDIAN);
  (void)endiantest;
}

template<typename T> FLATBUFFERS_CONSTEXPR size_t AlignOf() {
  // clang-format off
  #ifdef _MSC_VER
    return __alignof(T);
  #else
    #ifndef alignof
      return __alignof__(T);
    #else
      return alignof(T);
    #endif
  #endif
  // clang-format on
}

// Lexicographically compare two strings (possibly containing nulls), and
// return true if the first is less than the second.
static inline bool StringLessThan(const char *a_data, uoffset_t a_size,
                                  const char *b_data, uoffset_t b_size) {
  const auto cmp = memcmp(a_data, b_data, (std::min)(a_size, b_size));
  return cmp == 0 ? a_size < b_size : cmp < 0;
}

// When we read serialized data from memory, in the case of most scalars,
// we want to just read T, but in the case of Offset, we want to actually
// perform the indirection and return a pointer.
// The template specialization below does just that.
// It is wrapped in a struct since function templates can't overload on the
// return type like this.
// The typedef is for the convenience of callers of this function
// (avoiding the need for a trailing return decltype)
template<typename T> struct IndirectHelper {
  typedef T return_type;
  typedef T mutable_return_type;
  static const size_t element_stride = sizeof(T);
  static return_type Read(const uint8_t *p, uoffset_t i) {
    return EndianScalar((reinterpret_cast<const T *>(p))[i]);
  }
};
template<typename T> struct IndirectHelper<Offset<T>> {
  typedef const T *return_type;
  typedef T *mutable_return_type;
  static const size_t element_stride = sizeof(uoffset_t);
  static return_type Read(const uint8_t *p, uoffset_t i) {
    p += i * sizeof(uoffset_t);
    return reinterpret_cast<return_type>(p + ReadScalar<uoffset_t>(p));
  }
};
template<typename T> struct IndirectHelper<const T *> {
  typedef const T *return_type;
  typedef T *mutable_return_type;
  static const size_t element_stride = sizeof(T);
  static return_type Read(const uint8_t *p, uoffset_t i) {
    return reinterpret_cast<const T *>(p + i * sizeof(T));
  }
};

/// @brief Get a pointer to the the file_identifier section of the buffer.
/// @return Returns a const char pointer to the start of the file_identifier
/// characters in the buffer.  The returned char * has length
/// 'flatbuffers::FlatBufferBuilder::kFileIdentifierLength'.
/// This function is UNDEFINED for FlatBuffers whose schema does not include
/// a file_identifier (likely points at padding or the start of a the root
/// vtable).
inline const char *GetBufferIdentifier(const void *buf,
                                       bool size_prefixed = false) {
  return reinterpret_cast<const char *>(buf) +
         ((size_prefixed) ? 2 * sizeof(uoffset_t) : sizeof(uoffset_t));
}

// Helper to see if the identifier in a buffer has the expected value.
inline bool BufferHasIdentifier(const void *buf, const char *identifier,
                                bool size_prefixed = false) {
  return strncmp(GetBufferIdentifier(buf, size_prefixed), identifier,
                 flatbuffers::kFileIdentifierLength) == 0;
}

/// @cond FLATBUFFERS_INTERNAL
// Helpers to get a typed pointer to the root object contained in the buffer.
template<typename T> T *GetMutableRoot(void *buf) {
  EndianCheck();
  return reinterpret_cast<T *>(
      reinterpret_cast<uint8_t *>(buf) +
      EndianScalar(*reinterpret_cast<uoffset_t *>(buf)));
}

template<typename T> T *GetMutableSizePrefixedRoot(void *buf) {
  return GetMutableRoot<T>(reinterpret_cast<uint8_t *>(buf) +
                           sizeof(uoffset_t));
}

template<typename T> const T *GetRoot(const void *buf) {
  return GetMutableRoot<T>(const_cast<void *>(buf));
}

template<typename T> const T *GetSizePrefixedRoot(const void *buf) {
  return GetRoot<T>(reinterpret_cast<const uint8_t *>(buf) + sizeof(uoffset_t));
}

}  // namespace flatbuffers

#endif  // FLATBUFFERS_BUFFER_H_
Reply


Messages In This Thread
C++ Compile Problem ( Flatbuffers) and Tensor flow Micro - by hakko - 31-03-2023, 01:41 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)