EBlink squirrel error on stm32f3 - The index 'ntrfApi' does not exist

[jack133]

Hello,
I try to programm an Evaluation board with a STM32F303VE and an integrated STLink V2:
https://www.st.com/en/evaluation-tools/s...umentation

When I click on the debugger button under Embitz, I have the following error:
Squirrel Error
The index 'ntrfApi' does not exist
stm32_device[65] in 'stmicro/stm32f3.script'

Even if I try debugging in Power Shell to launch the EBLink alone with this command :
.\eblink.exe -v 7 -I stlink -S stm32 -G

The same error appears:
EBlink version 6.02-[201] by Gerard Zagema

Using EB_SCRIPT_PATH = C:\Program Files (x86)\EmBitz\EBlink\scripts

Interface      : STlink
Interface USB# : 36FF71063447313049172557
Interface at  1:40 - <BUS>:<ADDR>
Interface type : STlink/V2
STlink Frmware : V2.J46.S0
Target voltage : 3.21V
Interface speed: 4000KHz
Try DAP_AP 0.
Read CPU id on DAP_AP 0
CPU id found (0x410FC241)
Target selected: Cortex-M

Target detected: Cortex-M4 (r0p1) with FPv4_SP
HW breakpoints : 6
HW watchpoints : 4
Fault unwind  : Active (level 2)
Search script stm32.script in path: C:\Program Files (x86)\EmBitz\EBlink\scripts
Script found: stm32.script
Squirrel debug                          main©[17]    {stm32.script}
Squirrel debug                          main®[167]  {stm32.script}
Squirrel debug                        ebMain©[62]    {stm32.script}
Squirrel debug                    findDevice©[90]    {stm32.script}
STmicro device : 0x446
Search script stmicro/stm32f3.script in path: C:\Program Files (x86)\EmBitz\EBlink\scripts
Script found: stmicro/stm32f3.script
Squirrel debug                          main©[15]    {stmicro/stm32f3.script}
Squirrel debug                          main®[104]  {stmicro/stm32f3.script}
Squirrel debug                  stm32_device©[56]    {stmicro/stm32f3.script}
Squirrel debug                  stm32_device(e)[65]    {stmicro/stm32f3.script}
Squirrel debug                  stm32_device®[65]    {stmicro/stm32f3.script}
Squirrel debug                    findDevice®[113]  {stm32.script}
Catch{..} at ebMain[68] in "stm32.script"

Squirrel Error
The index 'ntrfApi' does not exist
stm32_device[65] in 'stmicro/stm32f3.script'
Squirrel debug                        ebMain®[69]    {stm32.script}

What can I do to correct this error ?

Thank you,

Stéphane