EMbitz

Full Version: Suggestion Editor text replace
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
On Embitz 1.11 when we select range with the Alt-key:
copy work
paste work
but entering text only apply to last line..  it would be nice if it can work like notepad++


Also is it possible to be able to move icon on the bar.. example, (DEBUG) I often do hit reset instead of the run... or run instead of step over... 


Thank...
by the way... EBLink work great... thank!!!
Hi, thanks.

I will see if the new Scintilla has this feature and if so I will replace the old one.
Hai, that's where the ears grow. https://github.com/mirror/scintilla
There is no definition of properties of words ending with "_TypeDef", for this reason auto-substitution is not performed when working with structures with a fixed address. Notepad ++ can't do either. (check)
Code:
typedef struct
{
  __IO uint32_t MODER;    /*!< GPIO port mode register,               Address offset: 0x00      */
  __IO uint32_t OTYPER;   /*!< GPIO port output type register,        Address offset: 0x04      */
  __IO uint32_t OSPEEDR;  /*!< GPIO port output speed register,       Address offset: 0x08      */
  __IO uint32_t PUPDR;    /*!< GPIO port pull-up/pull-down register,  Address offset: 0x0C      */
  __IO uint32_t IDR;      /*!< GPIO port input data register,         Address offset: 0x10      */
  __IO uint32_t ODR;      /*!< GPIO port output data register,        Address offset: 0x14      */
  __IO uint32_t BSRR;     /*!< GPIO port bit set/reset register,      Address offset: 0x18      */
  __IO uint32_t LCKR;     /*!< GPIO port configuration lock register, Address offset: 0x1C      */
  __IO uint32_t AFR[2];   /*!< GPIO alternate function registers,     Address offset: 0x20-0x24 */
} GPIO_TypeDef;

#define PERIPH_BASE            0x40000000UL /*!< Base address of : AHB/ABP Peripherals 
#define AHB1PERIPH_BASE       (PERIPH_BASE + 0x00020000UL)
#define GPIOA_BASE            (AHB1PERIPH_BASE + 0x0000UL)
#define GPIOA               ((GPIO_TypeDef *) GPIOA_BASE)

GPIOA->
@Aroyer
I just tested it with selection of multiple text lines with my mouse, i just works.